Editor’s Note: This is the seventh in a series of articles that is being published jointly between Security Technology & Design and SecurityInfoWatch.com. To read previous installments, visit www.securityinfowatch.com/cctv.

Networks allow devices such as network cameras, servers and PCs to communicate with each other, sharing information and, in some cases, a common Internet connection. Network designs can take many forms and vary in terms of performance and security.
It is useful to think of building a network as a layering process, beginning with the physical cabling configuration and connections. The number of cameras, the physical environment, the sensitivity of the application, and the protocols and software will impact the operation of the IP surveillance network.

Types of Networks
Networks can be local area networks (LANs), metropolitan area networks (MANs) or wide area networks (WANs). Each network covers a progressively larger area. For example, LANs exist within a building or company, while MANs could cover a campus or city center. WANs cover the largest areas—anything from multiple distant areas to the entire world. WANs often connect several smaller networks, such as LANs and MANs. The largest WAN is the Internet.

Basic Network Layout
Networks are made up of cabling such as Ethernet or fiber, and equipment such as servers, routers and hubs. There are many ways to physically lay out networks, but the main four designs are bus, ring, star and mesh. You can determine the right layout for any IP surveillance system by considering requirements such as redundancy, cost and number of cameras.

• Bus. A bus network connects each device to a main cable or link called “the bus,” creating a simple and reliable network configuration. If one device fails, the rest can still communicate with each other, unless the bus itself is broken. This setup is most often found in older LANs.

• Star. Star is the most popular topology used in LANs today. In star networks, all devices are directly connected to a central point. If one device is disconnected or crashes, none of the others will be affected. However, if the central switch goes offline, the entire network could fail. This makes it important to build redundancy into the system.

• Ring. In a ring network, devices are connected in a closed loop, meaning that adjacent devices are directly and indirectly connected to other devices. MANs and WANs often use ring configurations, but this design can be used for LANs as well.